danmar-products-inc
Results: 69
9817 Halo Helmet
The 9817 Halo Helmet is a protective helmet designed for wear by individuals who have balance disabilities, head/skull injuries, or seizures who do not need full head coverage. A band of 5/8-inch foam surrounds the head at the forehead level. It extends down to the temporal area on each side of the head and to the occipital area at the back. The top has adjustable crisscross straps to help stabilize the helmet on the head. An adjustable chin strap is included. OPTIONS: 7640 Velcro Chin Strap, 34
6628 Side Opening Head Support
The 6628 Side Opening Head Support is designed for use by individuals who are unable to independently maintain proper head positioning. Available in three sizes, this support cradles the entire head and may be used mounted or unmounted to a seating system or wheelchair. Made of closed cell vinyl-coated foam, the support features reinforced front and back plates, a hinge on one side, and a quick release buckle on the other side for ease in use. SIZES: Unmounted extra small, unmounted small, unmou
6762 Therapy Handles
The 6762 Therapy Handles are foam grasping aids for hands. These holders have a 1-inch extension which the thumb can be positioned around. A utensil, pen, pencil, or other instrument can be placed into the extension itself or in the end of the holder, depending on the hand position. An adjustable snap buckle slides along the strap for an individualized fit. An additional vinyl strap that attaches to the therapy handle strap is also included. The additional length allows the strap to be wrapped a
3462 Extra Long Face Guard Modification
The 3462 Extra Llong Face Guard Modification is an accessory for Danmar protective helmets (see separate entries). This guard is a full 1-inch longer than the standard guard, and also has larger eye and mouth openings. The guard is made of clear plastic with foam padding under the chin and around the sides of the face.
3464 Rear Foam Extension
The 3464 Rear Foam Extension is an accessory for Danmar protective helmets designed to provide additional head protection and ventilation. The extension attaches to the rear of the helmet, and is made of vinyl coated shock absorbing foam. DIMENSIONS: Purchaser specifies how far down the foam area should be extended. Available lengths are 0.5, 0.75, 1, 1.25, 1.5, 2 and 3 inches. Other lengths are available upon request.
3459 Hard Shell Ear Coverings
The 3459 Hard Shell Ear Covering is an accessory for Danmar protective helmets. The coverings are made of an inner layer of soft ventilated foam and an outer covering of tough polycarbonate plastic. The coverings attach to hard shell helmets and extend down over the ear area. They can be ordered with a new helmet or added to a previously purchased helmet.
3460 Soft Foam Ear Coverings
The 3460 Soft Foam Ear Covering is an accessory for the 9820 Soft Shell Helmet. The coverings are made of soft ventilated 0.5-inch thick foam that extends over the ear openings on a soft shell helmet.
9825 Deluxe Hard Shell Helmet
The 9825 Deluxe Hard Shell Helmet is a protective helmet made of polyethylene with a vinyl coated 1/2-inch thick foam liner. The helmet has a hard visor with a decorative chrome strip on it. The woven chin strap has a soft plastic chin cup. SIZES: XXSmall, XSmall, Small, Medium, Large, and XLarge. WEIGHT: 18 ounces. COLOR: Black, casa tan, pink and royal blue are standard. Custom colors are available for an additional charge. MODIFICATIONS AND OPTIONAL ADDONS: 3459 Hard Shell Ear Coverings, 3465
6917 Non-Stomp-Down-Able Heel Loops
The 6917 Non-Stomp-Down-Able Heel Loops are flexible polyethylene strap designed to provide an alternative to webbed heel straps on wheelchair footrests. An ankle strap is included for maintaining foot placement, as well as attachment screws. SIZES: Universally sized; one size fits all. COLOR: Black.
6821 Size Reducer
The 6821 Size Reducer is a foam insert designed to accommodate persons between sizes of the Hensinger Head Support (see separate entry). The vinyl coated foam insert fits into the inner circumference and has velcro straps which wrap around the head support. There are two models: Narrow and Wide. The narrow model can be used over or under the covers. The wide model adds some additional occipital support as the top foam piece folds over the back of the Hensinger. SIZES: Narrow or Wide. DIMENSIONS
6812 Modular Head Rest
The 6812 Modular Head Rest with Mount Plate is a head and neck support designed for use with the Hensinger Break-Away-Mount Plate (see separate entry). An adjustable vertical connector attaches the two devices together. Three vinyl coated foam discs cradle the head and may be adjusted for the use of head switches. COLOR: Black.
6620 Modular Chest Support
The 6620 Modular Chest Support is an adjustable torso support that allows individualization to fit different body variations. The support has removable yokes that are interchangeable between sizes, an inner core that allows the support to be shaped to fit, and an outer foam covering. Straps can be mounted to the back of a chair and have quick release buckle fasteners. The lap belt has a pivotal mount so the pull at the hips comes at the desired angle. Component sections can be ordered separately
6674 Lap Strap Cover
The 6674 Lap Strap Cover is foam strap padding that wraps around seat belt or lap belt webbing to prevent digging into sensitive skin or other pressure areas. This padding can also be used for backpacks, shoulder bags, etc. The cover is designed for use with 1.5- or 2-inch lap straps. DIMENSIONS: 14 inches (Small) or 18 inches (Large). COLOR: Black or casa tan.
Shoulder Pommels (Model 6670)
The Shoulder Pommels, model 6670, are shoulder and neck supports designed for individuals who have a tendency to lean to one side. The pommels are constructed with a bottom channel so that the shoulder straps can be pulled through for attachment. The supports are made of vinyl coated foam with an outer reinforcement. DIMENSIONS: Single is 5 x 4.5 inches; the Double is 10 x 4.5 inches and curved to fit the shoulder. COLOR: Casa tan or black.
7908 Reinforced Yoke Area For 6610
The 7908 Reinforced Yoke Area for 6610 is a torso support accessory designed for use with the 6610 Chest Support (see separate entry) to reinforce areas receiving hard wear. The yoke is a clear PVC (plastic) extruded tubing that is placed around the inside edge of the full yoke area. COLOR: Clear
6625 Trunk Support Bar & 6626 Trunk Support System
The 6625 Trunk Support Bar and the 6626 Trunk Support System are torso support and pelvic stabilizers designed for use when an individual is seated in a wheelchair or custom seating system. TRUNK SUPPORT BAR: The bar is made of an inner core of molded nylon with a vinyl coated foam cover. It has a 2-inch polyporpylene strap with a quick release buckle on one side and molded slots on the top and bottom of the core to enable straps to be atached if extra positioning is desired. A crotch strap can
6815 Hensinger With Mount Bar
The 6815 Hensiger with Mount Bar consists of the 6810 Hensinger Head Support (see separate entry) mounted on an aluminum bar designed to be attached to TumbleForm feeder seats or Danmar Trunk Support (see separate entries). The device slides over the seat with back buckle fasteners. Channel brackets for securing the bar after the head support is positioned are included. SIZES: Small, Medium, Large or Extra Large. COLOR: Bright blue. These custom colors are available for an additional $26: light
6809 High Back Hensinger Head Support
The 6809 High Back Hensinger Head Support is a head and neck support that consists of the 6810 Hensinger Head Support (see separate entry) with a 1.5 to 2 inch higher back for additional occipital support. The cushions are made of vinyl coated foam. The device comes unmounted or mounted. SIZES: Extra Small, Small, Medium, and Large. COLOR: Blue or black.
7901 Hensinger Covers
The 7901 Hensinger Covers are replacement covers for the 6810 Hensinger Head Support and the 6809 Hensinger Head Support with High Back (see separate entries). They are made of a cotton blend. SIZES: Extra small, small, medium or large. COLOR: Black or blue.
7902 Hensinger Strap
The 7902 Hensinger Strap is a replacement straps with either a snap buckle or an adjustable slide buckle designed for the 6810 Hensinger Head Support and the 6809 High Back Hensinger Head Support (see separate entries). The straps are attached to the back plate. An optional velcro closure is available. SIZES: Extra small, small, medium or large. COLOR: Black.
7903 Hensinger Quick Release Mount Plate
The 7903 Hensinger Quick Release Mount Plate is a headrest accessory for the Hensinger Head Supports (see separate entries). The plate has 2 straps that attach the unit to the back of a seating unit. The Hensinger Head Support attaches to the plate with velcro. The velcro release will allow the head to move forward with the body. For permanent mounting, 2 screws are used to insure that the front and back plate stay connected. DIMENSIONS: 12 x 4 inches. COLOR: Black.
7914 Half Mask Otto Bock Mount Plate
The 7914 Half Mask Otto Bock Mount Plate is a headrest accessory designed to mount the 6650 Half Mask (see separate entry) onto the Otto Bock headrest. The mask mounts with adhesive foam backing for breakaway release in the event of emergency impacts. COLOR: Black.
7906 Chest Support Straps
The 7906 Chest Support Straps are torso support accessories for the 6620 Modular Chest Support or the 6800 Seating Accessory Systems(see separate entries). SIZES: Infant, extra small, small, medium or large. COLORS: Black or rainbow. STRAP OPTION: Option C is standard. Option A, Option B and Yoke are available.
7910 Elongated Yoke Area For 6610 Or 6620
The 7910 Elongated Yoke Area for 6610 or 6620 is a torso support accessory designed to replace the straps of the Danmar Chest Supports (see separate entries). This flexible plastic strip helps to prevent the straps from getting caught in the spokes of wheelchair wheels. A buckle is attached to one end that snaps into the chest support and the other end is permanently mounted to the wheelchair base. COLOR: Black
7907 Chest Support Hardware
The 7907 Chest Support Hardware is a torso support accessory for the 6610 Chest Support (see separate entry). STRAP OPTION: Bottom or yoke.
8735 Combination Head Float & Mini Stabilizer Bar
The 8735 Combination head Float and Mini Stabilizer Bar is a float swimming aid designed to keep the face out of the water. The head float fits around the neck and under the back of the head. A 3-foot stabilizer bar is attached at the top of the head. Foam rings can be added, removed or arranged for more flotation on either side of the bar. SIZES: Medium or Large ($10 extra). COLOR: Yellow. These custom colors are available for an additional $26: light almond, baby blue, black, bright blue, casa
9836 Newborn Cap
The 9836 Newborn Cap is a protective helmet for infants. The cap is made from soft, 0.375-inch shock absorbent, ventilated foam that can be trimmed in front or back. The non-fabricoated foam edge revealed from cutting is still waterproof and can be cleaned. DIMENSIONS: 12 x 13 inches with 1/4 inch foam, 12 x 13 inches with 3/8 inch foam, and 15 x 16 inches with 3/8 inch foam. COLORS: Pink or baby blue. SIZES: Small, medium or large
3469 Quick Release Buckle Chin Strap Top Of Helmet
The 3469 Quick Release Buckle Chin Strap Top of Helmet is an accessory for protective helmets to be used in place of a regular chin strap when frequent attempts to remove the helmet occur. To release the strap, both sides of the buckle need to be squeezed simultaneously. Two styles are available: an under the chin side opening or top of helmet opening.
3465 Rear Hard Shell Extension
The 3465 Rear Hard Shell Extension is an accessory for protective helmets designed to provide additional ventilated coverage by extending the foam liner and polyethylene shell. SIZES: Length shell should be extended is specified by the buyer.
6858 Privacy Apron
The 6858 Privacy Apron is a toileting aid made of vinyl that extends up and around the waist with a buckle or velcro closure. Side cuffs wrap around the arm of the potty chair to the wrist area. Option available for positioning hands for good posture habits. Two styles are available: permanent mount or clip on. This unit is made to fit onto the 6850 Toilet Seat Cover with Reducer Ring (see separate entry). SIZES: Small, Medium or Large. DIMENSIONS: 8.25 inches high (Small) and 10.25 inches high
3468 Foam Visor
The 3468 Foam Visor is an accessory for protective helmets. This padded visor attaches to the front of the helmet and extends out approximately 3 inches. The visor is made of closed cell foam with vinyl coatingand retains compression resistance.
6850 Toilet Seat Cover With Reducer Ring
The 6850 Toilet Seat Cushion with Reducer Ring is a vinyl coated foam cushion that reduces the size of the toilet opening. The cleanable, portable cushion is made of 1-inch foam and have a snap-on design. SHAPE: Oval or round
6855 Soft Deflector & 6856 Personal Deflector
The 6855 Soft Deflector and the 6856 Personal Deflector are toilet seat deflectors for use with toilet seat covers. The 6855 is made to fit onto the 6850 Toilet Seat Cover with Reducer ring (see separate entry). These devices are made of vinyl-coated foam and snap into place on the front of the seat. The Personal Deflector has a waist band that holds the soft deflector in place. The Soft Deflector is available in a clamp on style or permanent mount style. SIZES: Small, Medium or Large. DIMENSION
6676 Contour Covers & 6678 Harness Covers
6676 Contour Covers and 6678 Harness Covers are padded covers for lap belts and shoulder straps. The covers are made of vinyl coated foam tubes that slide over belts and straps. The covers are flexible and washable. The 6678 model is designed for use with 1- or 2-inch straps. DIMENSIONS: Contour Covers are 12 x 2 inches, and Harness Covers are 8 x 1 inches (Small) or 12 x 2 inches (Large). COLOR: Black.
6924 Forearm Crutch Covers
The 6924 Forearm Crutch Covers are foam covers for forearm crutch cuffs. These vinyl coated covers slip on over the cuffs. SIZES: Small, to fit child size cuffs, and Large, to fit adult size cuffs. DIMENSIONS: 0.25 inch thick. COLOR: casa tan or black.
Stabilizer Bar (Models 8729 & 8729-3)
The Stabilizer Bar is a swimming and float swimming aid designed for use with lower, upper extremity, or mobility disabilities. This unit is designed to help maintain balance and equilibrium during water walking/gait exercises, to help with rest in the water when placed under the arms, or to help with kicking workouts. This device consists of a plastic bar with foam rings that can be attached at both ends in differing numbers according to the proficiency of the user. SIZES: Model 8729 is standa
8732 Water Ear Muffs
The 8732 Water Ear Muffs are adjustable swimming aids designed to keep ear molds, ear plugs or wax molds in place. The muffs are made of a soft foam inner lining that contours to the shape of the ear, holding the molds in place. The outer shell has straps with a buckle closure. The foam snaps out of the shell for drying. COLOR: Black shell with rainbow colored strapping.
6760 Utensil Handles
The 6760 Utensil Handles are foam holders that fit into palm of the hand. The holders have a hole in the center for eating utensils, personal hygiene items, activity brushes and crayons, and other items. The holders have an anchor strap that goes around the back of the hand, are contoured, and adjustable for fit. These devices may also be used as hand exercisers. SIZES: Small (1-inch diameter x 3 inches) and Large (1.5-inch diameter x 3.75 inches). COLOR: Blue, orange or red.
6922 Grip Covers
The 6922 Grip Covers are handgrip cushions for crutches, cane handles, and walkers. These spongy pads are made of 1/4-inch thick ventilated foam. DIMENSIONS: 6 inches long; fits handle diameters up to 1 inch. COLOR: Black.
7637 Cush-In-Pads
The 7637 Cush-in-Pads are helmet accessories made of lightweight, medical grade foam pads that allow for more individualized sizing of helmets. The material absorbs perspiration and may therefore provide a cooler environment within the helmet. These oval shaped pads with adhesive backing are easily positioned, fully washable and dry quickly. Sold in sets of 4. SIZES: Small and Large.
8728 Tri Swim
The 8728 Tri Swim is a swimming aid designed to provide flotation support for persons with some swimming skills. The device gives moderate lift to help maintain the body in a usual swim position. The Tri Swim consists of 2 vinyl covered foam sections. One is triangular and is positioned on the chest area; the other is a strap that goes around the neck. It has 1 quick release buckle for easy on and off. SIZES: Small for weight range from 30 to 50 pounds; Medium for weights 60 to 150 pounds; and L
8727 Dolphin Float System
The 8727 Dolphin Float System is a float swimming aid designed to compensate for uneven weight distribution in swimmers with physical or neurological disabilities. This harness style foam device has two removable side pads to minimize lateral rotation. A removable front third pad provides additional lift. OPTIONS: Stabilizer Bar for increased stability; swim rings for added head and neck support; and the crotch strap to prevent the flotation harness from riding up while swimming. SIZES: Small (f
6830 Sweep Headrest
The 6830 Sweep Headrest is a wrap around headrest with an occipital convex foam cushion built in across the bottom of the center pad to cradle the head. The support has two small wings that form the sides, angled at 60 degrees off center back pad. The heavy duty back plate has pre-threaded 1/4-20 metal inserts for mounting and eight 1-inch bushings which can be used as spacers to adjust the distance of the headrest to the head. The product can be ordered with or without mounting hardware. An opt
6919 Positioning Pillow
The 6919 Positioning Pillow is a body positioner and infant positioning cushion made of a foam blend. Small squares of foam fill an inner pillow case made of vinyl, which is covered with an outer pillowcase that zips off for washing. SIZES: Small or Large. DIMENSIONS: 20 x 20 inches (small) and 32 x 20 inches (large). COLOR: Forest green.
6915 Anti Thrust Cushion
The 6915 Anti Thrust Cushion is a wedge foam seat cushion designed to aid individuals who are prone toward slipping down into their seat. The cushion can be used in classroom chairs, wheelchairs, kitchen chairs, etc. Two snaps are attached to the rear of the cushion for fastening to the seating unit. The wedge is vinyl covered and washable. SIZES: Small, Medium, and Large. DIMENSIONS: Available in 14, 16, or 18 inches square (respective to sizes); all sizes are 3.5 inches in front tapering to 1
6925 Portable Abductor
The 6925 Portable Abductor is an abduction pommel for use out of a seating system that attaches to each leg with adjustable, nonremoveable straps. The curved foam center cushions the calf, knee, or thigh area. DIMENSIONS: 4 x 3 x 4 inches (Small) and 5.5 x 4.5 x 6.5 inches (Large). COLOR: Bright blue, casa tan or yellow. SIZES: Small or Large.
6766 Toy Holder
The 6766 Toy Holder is an adjustable grasping aid for the hand designed to allow a person without the ability to grasp to interact with a small toy in their hand. This snap on device has 2 Velcro bands used to hold a toy in place, and 3/4-inch webbing straps with snap closure that wrap around the palm and wrist. SIZE: One size fits all. COLOR: Rainbow strapping.
6800 Seating Accessory System
The 6800 Seating Accessory System is designed to provide head and trunk support to feeder seats. A pre-formed aluminum bar incorporates an attached head positioner with the Danmar chest support. The chest support's lap belt goes through existing strap holes and the bar fits around the seat and is secured with channel brackets (included). SIZES: Small, with lateral head support provided by foam pads, wedged and formed, to cradle the head; Medium and Large, both with full C Collar for side suppor
6814 Lateral Head Support With Mount Bar
The 6814 Lateral Head Support with Mount Bar is a headrest designed for use with feeder seats that can be positioned to support from the occipital area and higher. The support is made of foam padding that comes around the sides of the head to provide support. SIZES: Small, Medium, Large, and Extra Large. COLOR: Bright blue, black, orange, red or teal. These custom colors are available for an additional $26: Baby blue, forest green, silver/gray, maroon, pink, purple, royal blue, casa tan, white a
6672 Comfy Cuffs
The 6672 Comfy Cuffs are leg and arm straps made of foam, reinforced and covered with a durable vinyl finish. These positioning aids are adjustable to fit around armrests or footrests. The straps fasten with a one-snap buckle. DIMENSIONS: 9 x 1 inch (Small), and 11 x 1 inch (Large). COLOR: Black or casa tan
6650 Half Mask
The 6650 Half Mask is a headrest accessory designed to provide head support for forward thrusting individuals. The mask follows the contours of the forehead and cheeks to help hold the head comfortably within a headrest. A replaceable terrycloth pad lines the foam mask, and an aluminum inner core allows the headpiece to be formed to fit the face. For mounting purposes, one side of of the mask can be attached directly to headrest; the opposite side fastens with snap buckles. OPTIONS: 6650 Mount P
6810 Hensinger Head Support
The 6810 Hensinger Head Support is a wrap around collar designed to support the head by using base support areas at the occiput and jaw line. Manufacturer recommends this support be used in conjunction with chest support to help maintain mid-line head positioning. (Proper head positioning should result in improved breathing, swallowing, and simplified feeding; and may also be conducive to more social interaction and awareness during classroom activities.) The support fastens with a one-snap rele
6630 C-Collar And 6635 Extended C-Collar
The 6630 C-Collar is a neck support contoured for the lateral and posterior neck areas to help prevent neck hyperextension. The 6635 Extended C-Collar is the same as the C-Collar with a clavical support added. Both collar can be used in conjunction with most seating units, and used during classroom activities and feeding. DIMENSIONS: C-Collar is 8 x 3.5 x 2 inches; the Extended C-Collar is 8 x 10 x 2 inches. COLOR: Black or Casa Tan.
8730 Comfort Mat
The 8730 Comfort Mat is a therapy swim mat and float swim aids that can be used at the pool edge, for entry and exit from the water, and in the water. It can also be used as a soft floor covering in the shower. The mats are constructed of moisture proof, vinyl-coated foam. DIMENSIONS(LxWxT): 25 x 40 x 1 inches. COLOR: Yellow is standard; 15 custom colors available at an extra charge.
8723 Sectional Raft
The 8723 Sectional Raft is a float swimming aid designed for use with individuals with cognitive, upper extremity or mobility disabilities. This unit has a sectional design that supports and cradles the body for people who are not going to swim actively or who are insecure in the water. The design allows water to flow in and around the body, enabling interaction with the surroundings and reducing the fear of falling off a raft that holds the individual on top of the water. The raft has a reversi
9822 Hard Shell Helmet With Face Guard
The 9822 Hard Shell Helmet with Face Guard is a protective helmet designed to provide all-over head coverage. The face guard is made of Lexan polycarbonate plastic and has an eye level opening for unobstructed vision, and a mouth opening. Both openings provide ventilation. The face guard has a foam liner for comfort, and the entire face guard will pivot onto the top of the helmet. The helmet and face guard are washable. OPTIONS: Various faceguard options, modifications and optional addons are av
9821 Hard Shell Helmet
The 9821 Hard Shell Helmet is a protective helmet made of polyethylene with a shock absorbent 1/2-inch vinyl coated foam liner. The woven chin strap has an adjustable buckle and snap fastener. Both the liner and shell are ventilated, and the shell is washable. SIZES: Extra-Extra Small, Extra Small, Small, Medium, Large, Extra Large, and Extra-Extra Large. COLOR: Pink, casa tan, royal blue, and black. These custom colors are available for an additional $26: light almond, baby blue, bright blue, f
9820 Soft Shell Helmet
The 9820 Soft Shell Helmet is a protective helmet made of 1/2-inch shock absorbent, lightweight vinyl coated foam. The helmet has a woven chin strap with adjustable buckle and snap fastener. This helmet is washable. OPTIONS: 3460 Soft Foam Ear Coverings, 3466 Reinforced Liner, 3467 Reinforced Seams, 3469-U Quick Release Buckle Chin Strap Under Chin, 3470 Eyeglass Relief Area, 3472 Custom Strapping System, 3469 Quick Release Buckle Chin Strap Top of Helmet, and 3468 Foam Visor. SIZES: Infant, Ext
9824 Hard Shell Helmet With Face Bar
The 9824 Hard Shell Helmet with Face Bar is a protective helmet designed for use when direct, face forward impact is probable. The helmet is made of polyethylene and the face bar of clear, Lexan polycarbonate plastic. This washable helmet has a woven chin strap with adjustable buckle and snap fastener. OPTIONS: 3459 Hard Shell Ear Coverings, 3460 Soft Foam Ear Coverings, 3465 Rear Hard Shell Extension, 3466 Reinforced Liner, 3467 Reinforced Seams, 3469-U Quick Release Buckle Chin Strap Under Chi
9823 Chin Guard
The 9820 Chin Guard is a helmet accessory made of 1/2-inch shock absorbent, vinyl coated foam. The guard has small openings for ventilation and a chin strap with nylon buckles. This washable accessory attaches to all Danmar soft or hard shell helmets (see separate entries). SIZES: Small or Large. COLOR: Standard colors are pink, royal blue, and casa tan. These custom colors are available for an additional $26: forest green, bright blue, black, baby blue, light almond, silver/gray, maroon, orange
8720 Delta Swim System
The 8720 Delta Swim System is a float swimming aid designed to aid in progressive swimming development and may be most appropriate for individuals who can maintain postural equilibrium with controlled arm movements. The Delta is also designed to help maintain a vertical position in the water to assist with walking, running, and aerobic exercises. By utilizing the water's resistance, rehabilitation therapy can be directed at a specific area or muscle grouping. This body float is constructed of du
8725 Head Float
The 8725 Head Float is a float swimming aid designed to support the head of individuals with reflex domination. The cushioned support allows the head to rest without pressure on the spinal column, encouraging neutral positioning. This swimming aid is made of vinyl-coated flotation foam. SIZES: Small (for users weighing 20 to 30 pounds), medium (for users weighing 40 to 50 pounds), and large (for users weighing 60 to 175 pounds). DIMENSIONS (LxWxT): 16 x 12 x 1.5 inches (small), 20 x 13 x 2 inche
8724 Swim Rings
The 8724 Swim Rings are multi-purpose float swimming aids. Sets of the rings may be snapped together for neck, chest, or torso support. Individual rings can be removed to reduce the amount of flotation. The rings are made of vinyl coated foam. SIZES: Small, for weights 20 to 30 pounds; Medium, for weights 30 to 80 pounds; and Large, for weights 80 to 200 pounds. DIMENSIONS: Rings are 1-inch thick with 20 inches of flotation on a 36 inch strap per set. Diameters are 2.5 (Small), 3.5 (Medium), and
6610 Chest Support
The 6610 Chest Support is a torso support and harness restraint designed for firm trunk support. The support is made of foam with an inner moldable core that can be formed to follow body contours. The yokes have straps for attachment to high back standard wheelchairs, travel chairs, and strollers. Placement holes are pre-cut in yokes for adjustments in size. The support has quick release buckles, a lap belt with pivotal mounts, and a polypropylene strap with nylon quick release buckle that goes
Danmar Anterior Head Support
Danmar Anterior Head Support is a head supporting collar design to help individuals with reduced neck strength and reduced ability to hold up their heads to do so by providing firm, but gentle, lifting of the chin and lateral support of the head. There is a padded roll around the rear strap for a comfortable finish. Soft cloth covers are included over the vinyl-coated foam. This headrest is an important alternative to help meet the positioning needs of those who require some supplemental support
Danmar Full Coverage Helmet
Danmar Full Coverage Helmet is intended for individuals who are at risk of frequently striking surfaces with their head and resulting head injuries, the helmet is meant to provide greater impact resistance and designed to provide extra coverage to the temples, cheeks, ears and nape of the neck. This lightweight helmet is made from shock-absorbent foam that is fully ventilated. It’s coated in vinyl, so it’s easy to clean using just soap and water. With no hardware in the foam, there’s no danger o
Danmar Hensinger Head Support with High Back
Danmar Hensinger Head Support designed for individuals who cannot support or hold up their own necks or have low strength in their neck, the product features a High Back which can help maintain mid-line head positioning. Proper head positioning facilitates improved breathing, swallowing, and simplified feeding. It also aids in social interaction and awareness during classroom activities. The Hensinger is built with strong yet pliable reinforcement material around the outside of the support. A si
Danmar Side Opening Head Support
Danmar Side Opening Head Support is a head supporting collar design to help individuals with reduced neck strength and reduced ability to hold up their heads by providing firm but gentle lifting of the chin, and lateral and occipital support of the head. The closed cell vinyl-coated foam is reinforced in front and back for added strength. Secure, soft, and very supportive, this head support opens on the side with a quick release buckle closure for easy on/off. The Side Opening Head Support can b
Danmar Swirl Collar
Danmar Swirl Collar offers minor to moderate head support. Can be used alone or with any seating system and by individuals who are ambulatory. This Swirl of soft foam wraps around the neck and has a hook and loop adjustment at the back that makes fitting a breeze. Used for minor to moderate head support, this collar encourages easy movement from side to side. When properly fitted, the Swirl should make contact with the chin and jaw line.